Features:
•The remote display means the protector can be mounted close to the incoming feed or first way on the distribution board and the display in an easily visible position, eg on front of cabinet.
• Very low let-through voltage between all sets of conductors (phase to neutral, phase to earth and neutral to earth).
• Maximum surge current greatly in excess of the 10kA worst case indicated in BS 6651 and IEEE C62.41.
• Repeated protection in lightning intense environments, with 20 years predicted lifetime.
• Innovative multiple thermal disconnect technology, anticipates standards authorities’ future demands, for safe disconnection from abnormal or faulty supplies.
• Slimline, remote display gives three way visual indication of protection status.
• 1m cable for connection between protector and display as standard.
• Plug-in cable connections between protector and display enable easy connection.
• Advanced pre-failure warning so you need never be unprotected.
• Remote indication facility allows pre-failure warning to be linked to a building management system, buzzer or light.
• Changeover active volt free contact enables the protector to be used to warn of phase loss (ie power failure, blown fuses, etc).
• Unique flashing warning of potentially fatal neutral to earth supply faults (caused by incorrect earthing, wiring errors or unbalanced conditions).
• Robust steel housing for the protector, and sturdy ABS housing for the display.
• Base provides ultra-low inductance earth bond to metal panels.
• Protector unit comes with convenient holes for flat mounting.
• Remote display is easily installed using standard drilling tools.
• Remote display comes with integral fixings and a panel drilling template.
• Compact size for installation in the power distribution board.
• Maintenance free.
|