Lightning Protection
  d Furseweld Exothermic
Welding System
d Electronic Systems
Protection
  - ESP 240 M1 & ESP     415 M1
- ESP 415 M1R
- ESP 415 M2
- ESP 240-5A/BX
- ESP MC
- ESP MMP B275B,   MMP C275
- ESP KT1
  Earthing & Lightning
Protection
   
   Products > Lightning Protection > Electronic Systems Protection >                          ESP 415 M2
 

Electronic Systems Protection
Mains supplies and power distribution systems

  
 
  ESP 415 M2
 • For customers who demand a protector rated for a maximum surge   current greatly in excess of the probable worst case (BS 6651, IEEE   C62.41).
• Suitable for three phase (346-484V) supplies, whatever their supply   current.
• For a maximum surge current rating of 60kA (unit total 240kA), use   ESP 415 M2.
• For a maximum surge current rating of 120kA (unit total 480kA), use   ESP 415 M4.		  
 
Application:
Use these units at the main low voltage distribution board for extra high surge current protection.

Typically protect computer,communication and control equipment.
    
 

Features:
• Extra high maximum surge current of 60kA (240kA unit total) for ESP 415 M2 and 120kA (480kA unit   total) for ESP 415 M4.
• Very low let-through voltage between all sets of conductors (phase to neutral, phase to earth and   neutral to earth).
• Repeated protection in lightning intense environments, with 20 years predicted lifetime.
• Innovative Sovtrip™ multiple thermal disconnect technology, anticipates standards authorities future   demands for safe disconnection from faulty or abnormal supplies (without compromising protective   performance).
• Three way visual indication of protection status.
• Advanced pre-failure warning so you need never be unprotected.
• Remote indication facility allows pre-failure warning to be linked to a building management system,   buzzer or light.
• Changeover active volt free contact enables the protector to be used to warn of phase loss (ie power   failure, blown fuses, etc).
• Unique flashing warning of potentially fatal neutral to earth supply faults (caused by incorrect   earthing, wiring errors or unbalanced conditions).
• Robust steel housing.
• Protector base provides ultra low inductance earth bond to metal panels.
• Convenient holes for flat mounting.
• Compact size for installation in the power distribution board.
• Maintenance free.